The Smart Export Guarantee is the official scheme under which licensed electricity suppliers pay small-scale generators for the electricity they export to the grid. To apply, you need a renewable energy system with proper certification, a meter that records your exports every half hour, and an export electricity number. You apply directly to a supplier offering a tariff, and they set the rate you receive, which must always remain above zero.
What the Smart Export Guarantee is
Under this scheme, small-scale generators are paid by electricity suppliers for electricity they export to the grid. GOV.UK says it applies to England, Scotland and Wales, and Ofgem says installations must be in Great Britain. You need a renewable electricity generating system that meets the eligibility requirements.
The scheme was launched on 1 January 2020. It followed the Feed-in Tariff scheme, which closed on 31 March 2019. Payments are made for the electricity you export, and you are entitled to payments based on actual meter readings.
Licensed suppliers with at least 150,000 domestic electricity customers must offer at least one tariff under the scheme. Other suppliers may take part voluntarily.
Beyond keeping the rate above zero, licensees are free to set their own tariff rate, contract length and other contractual terms, so these can differ from one company to the next.
Who can get paid under the scheme
The scheme is for small-scale generators. To be eligible to claim payments, your system must use one of the approved technologies.
The approved technologies are:
- Solar photovoltaic panels
- Wind turbines
- Micro combined heat and power systems
- Hydro generators
- Anaerobic digestion installations
There are strict capacity limits on the size of the installation you can register. For most of the eligible technologies, including solar panels, wind turbines, hydro generators and anaerobic digestion, the total installed capacity must not exceed 5MW. If you operate a micro combined heat and power system, the capacity limit is much lower, capped at 50kW.
You can only claim these payments if you are not already receiving export payments from the older Feed-in Tariff scheme. The rules are clear that you cannot claim export payments from both schemes at the same time.
What you need before you apply
Suppliers will not accept your application unless your setup meets specific technical and administrative standards. You must have these three main elements in place before you approach a supplier for a tariff:
- An MCS certificate or recognised equivalent to show your installation and installer are certified.
- A smart meter or export meter capable of providing half-hourly export readings.
- An export MPAN to identify your specific export meter point on the national network.
First, you need to show that your installation and your installer are suitably certified. For solar panels, wind turbines and micro combined heat and power setups up to 50kW, an MCS certificate may show this, although other schemes may be equivalent. Your installer arranges this certification when they fit the system. If you want to know more about the paperwork, you can read about how MCS certification works. If you cannot provide this proof or a recognised equivalent, the supplier is not obliged to offer you a tariff.
Second, you must have a meter capable of providing half-hourly export readings. This would typically be a smart meter.
Finally, you need an export MPAN. This is a unique 13 digit reference number that identifies your specific export meter point on the national network. It is completely different from your import MPAN, which is the number used to track the electricity you buy and consume. The licensee provides this export number.
How to apply and who to apply to
You must apply directly to a supplier that offers a tariff under the scheme. The supplier you apply to can be different from your current electricity supplier, and Ofgem says you can apply to any licensee that offers a tariff. You can buy your import electricity from one company, buy your gas from another, and receive your export payments from a completely different licensee.
Because suppliers set their own rates and contractual terms, Ofgem advises generators to shop around. You should look at what different companies offer, compare their rates, and choose the one that provides the best return for your household. Some tariffs are tied, with conditions such as buying or using certain products or importing from the same supplier. You are allowed to receive a tariff from only one licensee at a time, so you must choose a single supplier for all your exported power.
Once all your details are approved and the meter is confirmed to be recording correctly, the supplier will confirm the terms in writing. That written confirmation forms the contract. Read it carefully to ensure the rate and conditions match what you applied for before you agree to proceed.
How payments work
The central rule of the scheme is that you are paid strictly for the units of electricity you feed back to the grid. You will not be paid for any electricity that you generate and use yourself in your home.
The licensee sets the payment amount, the length of the contract and the other terms of the agreement. The only firm rule on pricing imposed by the regulator is that any tariff offered must always remain above zero. This means a tariff cannot be set at zero.
You are entitled to payments based on actual meter readings. A licensee is not required to pay until it has actual export meter readings from your half-hourly export meter.
There are no set rules on how often payments are made. The licensee decides the payment frequency and confirms this schedule in your contract. Check the frequency in the written terms before you agree to a tariff.
What the latest Ofgem report shows about tariffs and rates
Ofgem monitors the scheme closely and publishes an annual report detailing how it is performing and what suppliers are paying. The figures for the period covering 1 April 2024 to 31 March 2025 are the latest in Ofgem's annual report, so they are that year's figures and not today's rates.
During that reporting year, 11 licensees offered a total of 50 different tariffs. By the end of March 2025, there were 270,395 installations registered on a tariff across Great Britain. In total, suppliers paid out £56.97 million to generators over the 2024 to 2025 period.
The report splits tariffs into two distinct categories: tied and untied. A tied tariff comes with specific conditions you must meet. Of the 50 tariffs, 29 were tied and 21 were untied. Tied tariffs have conditions such as buying or using certain products or importing from the same supplier. Untied tariffs do not have such conditions.
The table below shows the average and lowest rates for tied and untied tariffs in that year. The highest untied rate available was 12p/kWh.
|
Tariff type |
Average rate |
Lowest rate |
|---|---|---|
|
Tied tariffs |
14.54p/kWh |
5p/kWh |
|
Untied tariffs |
4.39p/kWh |
1p/kWh |
These are the figures for the 2024 to 2025 reporting year, not current rates. The gap between the average tied rate of 14.54p/kWh and the average untied rate of 4.39p/kWh is significant. Because rates vary so much, the regulator states that consumers must actively compare options to ensure they get the best return on their exported power.
If you also have a battery or other generation
If you have a battery, or a standby generator, connected to your system, the rules around export payments can be more complicated.
A licensee is only obliged to make payments where the export comes from an eligible renewable installation. If your export meter also records power sent to the grid from a non-eligible source, the supplier does not have to pay for that specific export. One example is a battery charged from another supply rather than from the eligible installation.
Licensees approach this differently, so ask yours before you apply.
You must check the terms carefully if you have a battery or are planning to get one. If you want to understand the initial expense, you can read about the cost of home battery storage, but you must also ask your chosen export supplier how a battery will affect your tariff eligibility.
If you have a problem with your supplier
Sometimes things go wrong with meter readings, contract terms or the payments themselves. If you have a problem with your export tariff, there is a clear process you must follow to get the issue resolved.
You must take your complaint to your export licensee first. You should provide them with your actual meter readings, your contract details and a clear explanation of what has gone wrong. Keep copies of all correspondence and note the dates of any phone calls to help your case.
If a satisfactory solution has not been agreed after eight weeks, the complaint may be referred to the Energy Ombudsman.
You must also ensure that you are claiming your payments correctly. Collecting payments under both this scheme and the older Feed-in Tariff export scheme at the same time is against the rules. Doing this knowingly could constitute fraud.
Common questions
Can I get SEG payments if I am on the Feed-in Tariff?
You cannot receive a Smart Export Guarantee tariff if you are receiving export payments under the Feed-in Tariffs scheme.
Do I need a smart meter to get paid?
You must have a meter that can provide half-hourly export readings to the supplier. This would typically be a smart meter.
How often will the supplier pay me?
There are no set rules dictating how often a supplier must make payments to generators. The supplier decides the frequency themselves and will state this clearly in your contract. Check the written terms before you agree.
Do I have to use my current electricity supplier?
No, you do not have to use your current energy supplier for your export payments. You can apply to any licensed supplier that offers a tariff under the scheme. This allows you to shop around and find the best export rate, even if you decide to keep your import electricity with your current provider.
Next steps
Before you apply for a tariff, make sure you have all your paperwork and equipment ready. Following these steps will help you secure the right rate for your exported electricity without unnecessary delays.
- Check that your installation and installer are fully certified and that you have the correct certificate.
- Ensure your smart meter is working and capable of taking half-hourly export readings.
- Compare tied and untied tariffs from several different suppliers to find the best rate.
- Check the contract terms for payment frequency and the rules on battery storage.
- Apply to your chosen supplier and wait for them to issue your export MPAN and written contract.
If you are planning to install renewable technology to take advantage of these payments, you will need a qualified professional to carry out the work and provide the right certification. If you want to know what solar panels cost you can find an electrician near you who can help you set up a safe, certified installation.
Find a top rated electrician near you
5,057 electricians across the UK, each ranked on their Google rating and the number of reviews behind it. Start with your county: