Planning

What Is a Fused Spur and When Do You Need One?

A fused spur, or fused connection unit, feeds a fixed appliance through its own fuse instead of a plug. See what it is for, switched or unswitched, the paperwork and why an electrician should fit one.

Illustration of a wall plate with a switch beside a small fuse and an extractor fan.

A fused spur is a wall-mounted electrical unit with its own fuse that feeds a fixed appliance directly instead of running through a standard plug and socket. It is wired straight into your electrical system by a qualified electrician. You may see one on a quote or a certificate, or beside a fixed appliance such as a boiler.

What is a fused spur?

A fused spur is a way to connect a higher power appliance permanently to your home wiring. Instead of plugging a washing machine into a standard socket, the appliance cable goes straight into the back of a fused spur faceplate. Because the connection is hardwired, you cannot unplug the appliance or plug anything else into that space.

The unit contains a small fuse carrier on the front. This holds a cartridge fuse that protects the specific appliance and the cable connecting it from drawing too much electrical current. If a fault develops and the appliance pulls too much power, the fuse is designed to blow and disconnect the electricity.

In electrical terms, a spur is a branch cable that comes off an existing circuit. When an electrician adds a new connection point to an existing ring of sockets, they create a spur circuit. The unit fitted at the end of that branch to protect the new appliance is the fused spur. While modern homes have a consumer unit, also called a fuse box or fuse board, that protects the whole circuit with a circuit breaker or an RCD, the fused spur provides targeted protection for just one piece of equipment.

What the names fused connection unit and fused spur socket mean

When you read a quote from an electrician or look at an electrical certificate, you might see several different names used for the exact same piece of equipment. The name fused connection unit is also widely used.

In everyday trade language, most electricians call it a fused spur. If the faceplate has a button on it to turn the power on and off, it is often written down as a fused spur switch or a switched fused spur. These terms are completely interchangeable and refer to the exact same type of unit on your wall.

You may also hear people refer to a spur socket. A fused spur is wired directly to the appliance and does not use a plug and socket, so if a quote mentions a spur socket, ask the electrician to explain exactly what they mean before the job starts.

What a fused spur is used for

Fused spurs are used instead of conventional plug sockets with higher power electrical devices. They provide a dedicated connection for equipment that draws a lot of electricity or needs to be permanently wired into the property for safety reasons. These units are used for spur circuits and hardwired appliances, and should be used only with circuits requiring a spur or hardwired appliances.

Typical domestic examples of appliances connected this way include:

  • Ovens
  • Dishwashers and washing machines
  • Central heating boilers and thermostats
  • Refrigerators and freezers
  • Security lights

It is always an electrician's decision whether a specific appliance requires a fused spur or a normal socket. They will look at the existing wiring and decide the safest way to connect the new equipment without overloading your electrics.

Switched or unswitched fused spur

Fused spurs come in two main types. The choice between a switched and an unswitched unit depends entirely on the appliance being connected and whether it needs to be turned off manually. The units can be switched or unswitched, with a power indicator or not, and with or without a cable outlet, depending on the need.

Switched fused spurs feature a switch or button on the faceplate that allows the unit to be manually turned on or off. They suit appliances that may need to be deactivated for maintenance, cleaning or safety reasons. Which style suits a given appliance, such as an electric cooker, is the electrician's decision.

Unswitched fused spurs do not have a manual button. They provide a permanent supply of electricity and cannot be turned off at the wall. They are typically used for devices such as freezers or security lights that run continuously and should not be turned off by accident. They are also used for appliances that already have their own separate control switch located elsewhere in the room.

This table summarises the differences between switched and unswitched units.

Feature

Switched fused spur

Unswitched fused spur

Manual control

Features a switch or button to manually turn the unit on or off

Does not have a manual button

Best suited for

Appliances that may need to be deactivated

Devices that run continuously

Typical examples

Appliances that may need switching off

Freezers, security lights

Your electrician will assess your setup to choose the right style of faceplate.

Which fuse is in a fused spur?

A fused spur contains an individual cartridge fuse that sits inside a small removable carrier on the front of the plate. This fuse is a deliberate weak link designed to blow and cut the power if the appliance develops a severe fault. The fuse protects the short length of cable running to the appliance from overheating and causing a fire.

The most widely used fuse ratings for these units are 10A, 13A and 20A. A unit sold with a 13A fuse included is common, and 3 amp and 5 amp fused spurs are also available.

You do not need to guess which fuse size to buy or fit. The electrician installing the unit will check the manufacturer instructions for your specific appliance and fit the correct fuse rating to match it. Fitting the wrong size is dangerous, as a fuse that is rated too high will not blow when it should, leaving the wiring entirely unprotected.

Does a fused spur need an electrician?

Yes. Because fused spurs are directly wired between a main cable and an appliance, they do not use a simple plug and socket. They become a permanent part of your fixed electrical wiring. For this reason, they are only installed or removed by a qualified electrician.

If you want to add a new connection point to a room, you cannot simply wire a spur yourself. Electrical Safety First notes that while it is likely you can add extra sockets, this does depend on your electrical installation. An electrician must assess the load, the circuit type and the cable rating before they add any new wiring.

Electrical Safety First also states that electrical work should be carried out only by electrically competent persons, such as registered electricians. They recommend that you use a registered electrician for any electrical work in the home.

Is fitting a fused spur notifiable work?

Part P of the Building Regulations covers electrical work in homes in England and Wales. Scotland has its own building standards system and Northern Ireland differs, so these rules are not UK wide. Certain types of electrical work are classed as notifiable, which means the local building control department must be informed.

In England, the Planning Portal says that the installation of a new consumer unit or fuse box and the installation of a complete new circuit are notifiable. If an electrician is just altering or adding a spur to an existing circuit, it is notifiable only in special locations. In England, special locations are defined as the spaces around baths and showers. Alterations or additions to existing circuits outside these special locations are not notifiable.

In Wales, the building standards differ and special locations include kitchens and outdoors as well as bathrooms. In Wales, non-notifiable work includes any addition or alteration to an existing circuit that is not in a kitchen, bathroom or outdoors. In Wales, kitchens count as special locations, so adding to an existing circuit there is not in the non-notifiable list.

Even if your job is non-notifiable, the Planning Portal states that all other work should still be designed and installed, and inspected, tested and certificated in accordance with BS 7671, which is the national wiring standard. If you are unsure whether your planned work is notifiable, the official advice is to contact your local authority building control department to check.

What paperwork to expect

Whenever an electrician carries out work in your home, you should expect the correct certificate for the job. Keep this paperwork in a safe place for when the property is sold.

If the electrician installs a complete new circuit to feed a heavy appliance via a fused spur, they should provide a completed Electrical Installation Certificate showing the work has been tested for safety. For non-notifiable work, such as an addition to an existing circuit outside the special locations, they should provide a Minor Works Certificate.

If the job is classed as notifiable work, it must either be carried out by a registered electrician or building control must be told before it starts. Electricians registered with a government-authorised competent person scheme can self-certify their own notifiable work. The Planning Portal says registered electricians should arrange a Building Regulations Compliance Certificate within 30 days of completing the job. Understanding electrical certificates and Part P rules ensures you do not get caught out by missing paperwork when you move house.

Common questions

Can I change a fused spur to a standard plug socket?

You should not swap a fused connection unit for a plug socket without an electrician checking the circuit first. A spur is designed to supply one specific fixed appliance with a known power demand. An electrician will need to assess the load, circuit type and cable rating to confirm whether the existing wiring can safely support a standard plug socket, which could be used for multiple unpredictable devices.

Why does my boiler have a fused spur?

A boiler is a fixed appliance, and a fused spur is wired directly to it with its own fuse instead of a plug and socket. Which unit suits your boiler is a decision for the electrician or heating engineer who installs it.

What is a fused spur for an extractor fan?

A bathroom extractor fan is a fixed appliance, and the right way to connect it is an electrician's decision. In England the spaces around baths and showers are special locations, so adding to an existing circuit there is notifiable work. The Planning Portal advises asking your local authority building control department if you are unsure.

Do I need an unswitched fused spur for a fridge?

Refrigerators and freezers are typical examples of appliances that run continuously and should never be turned off by accident. Unswitched fused spurs are typically used for devices such as freezers that run continuously, and an electrician will decide which type suits your appliance.

Next steps before you book

Before you hire an electrician to install a fused connection unit, run through a few basic checks to ensure the job goes smoothly and you get the right paperwork.

  • Check the electrician is registered with a government-authorised competent person scheme, such as NICEIC or NAPIT, so they can self-certify their work if it turns out to be notifiable.
  • Ask whether the appliance you are buying requires a switched or unswitched unit, and whether it needs a specific fuse rating.
  • Ask whether the job is notifiable where you live, as the rules differ between England and Wales.
  • Ask for a fixed price quote in writing that clearly includes VAT, the cost of the unit itself, and the required safety certificates.
  • Check if the quote includes making good any plasterwork or decoration, as the electrician will create dust and noise if they need to cut into the wall to bury the new cable.
  • Remember that under the Consumer Rights Act 2015, the service must be carried out with reasonable care and skill, and you have the right to ask for poor work to be put right at no extra cost.
  • Note that services arranged at home, by phone or online usually carry a 14-day cooling-off period, though this does not automatically apply if you have asked for an urgent repair.

Taking the time to compare quotes from registered professionals will help you secure a safe and compliant installation. You can use our directory to find an electrician near you who can assess your circuit and fit the correct unit for your appliance.

Find a top rated electrician near you

5,057 electricians across the UK, each ranked on their Google rating and the number of reviews behind it. Start with your county:

All counties and towns · The UK Top 100 electricians

James Whitfield
Written by

James is a writer and editor for Top Rated Electricians, covering electrical work, safety checks and EV chargers. When he's not writing guides, he plays the guitar badly but often.

Looking for a trusted electrician? Browse our verified listings.

Find an Electrician